skip to: page content | links on this page | site navigation | footer (site information)

Mariappan "Jawa" Jawaharlal, Ph.D.

Teaching Related

  1. Uei-Jiun fan, Mariappan Jawaharlal and Saeed Monemi, 2007, Enhancing Experiential Pedagogy with Interdisciplinary Engineering Service Learning Activities, International Forum of Teaching and Studies, Volume 3, No. 2, American Scholars Press.
  2. Mariappan Jawaharlal, Amir Rezaei and Saeed Monemi, 2007, Learn and Serve - Design Projects for the Community, ASEE Annual Conference and Exposition, June, Honolulu, HI
  3. Samuel Yang and Mariappan Jawaharlal, 2007, A General Purpose Sensor Board for Mechatronic Experiments, ASEE Annual Conference and Exposition, June, Honolulu, HI
  4. Amir G. Rezaei, Jawaharlal Mariappan, Kyu-Jung Kim, Angela Shih , 2007, On Development of a Hybrid Vector Statics, ASEE Annual Conference and Exposition, June, Honolulu, HI
  5. Kyu-Jung Kim, Amir G. Rezaei, Jawaharlal Mariappan and Angela Shih, 2007, Development of Online Hands-On Experiments for a Hybrid Vector Statics Course, ASEE Annual Conference and Exposition, June, Honolulu, HI
  6. Mariappan Jawaharlal, 2007, Rose Float Design Course, ASEE Pacific Southwest Conference, April, Reno, NV
  7. Mariappan Jawaharlal, César Larriva and Jill Nemiro, 2007, School Robotics Initiative - An Outreach Initiative to Prepare Teachers and Inspire Students to Choose a Career in Engineering and Science, ASEE Pacific Southwest Conference, April, Reno, NV
  8. Amir G. Rezaei, Jawaharlal Mariappan, Kyu-Jung Kim and Angela C. Shih , 2007, Lessons Learned from a Newly Developed Hybrid Vector Statics Course Based on Fundamental Concepts and Hands on Experiments, ASEE Pacific Southwest Conference, April, Reno, NV
  9. Mariappan Jawaharlal, 2007, Entrepreneurial Projects at Cal Poly Pomona, NCIIA 11th Annual Conference, March, Tampa, FL
  10. Mariappan Jawaharlal, Uei-Jiun Fan and Saeed Monemi, Implementing Service Learning in Engineering Curriculum, 2006, ASEE Annual Conference, Chicago, IL
  11. Ravi, Vilupanur and Jawaharlal, Mariappan, 2006, Integrating Context-Based, Just-in time Activities in a Traditional Design Class, ASEE Pacific Southwest Conference, April, Pomona, CA
  12. Leopard, Rebecca, Jawaharlal, Mariappan and Abedini, Kamran, 2006, Statics Visualization Kit, ASEE Pacific Southwest Conference, April, Pomona, CA
  13. Jawaharlal, Mariappan, 2006, Engaging Learners Through Designs That Matter, NCIIA 10th Annual Conference, March, Portland, OR
  14. Fan, Mariappan, and Monemi, 2005, Enhancing Experiential learning Pedagogy with Interdisciplinary Engineering Service learning Activities , NCUT, August, Beijing , China
  15. Mariappan, Fan and Monemi, 2005, Enhancing Authentic Learning Experiences Through Service Learning, ASEE Pacific South West Regional Conference, April, Loyola Marymont, Los Angels, CA
  16. Mariappan, Fan and Monemi, 2005, Engineering Service Learning and Entrepreneurship Opportunities, NCIIA 9th Annual Conference, March, San Diego, CA
  17. Mariappan, Shih, and Schrader, 2004, Use of Scenario Based Learning in Teaching Statics, Session 2666, ASEE Annual Conference, Salt Lake City, UT
  18. Mariappan, Shih, Schrader and Elmore 2004, Scenario-Based Learning and Multimedia in Improving Engineering Education, ASME 2004 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City , Utah, September.
  19. Shih, and Mariappan, 2004, Scenario-Based Learning Approach in Improving Undergraduate Engineering Education, ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, November
  20. Tavakoli and Mariappan, 2000, Concurrent Teaching of Engineering Design, Analysis and Manufacturing , The International Journal of Mechanical Engineering Education, Volume 28, Number 4
  21. Mariappan, and Marchese, 1998, TQM Approach to design in the sophomore engineering clinic , ASME International Mechanical Engineering Congress and Exposition, Paper No. 98-WA/DE-17, Anaheim, CA
  22. Mariappan, 1997, A Laboratory for Mechatronics Courses , ASEE Conference , Session on Laboratory Development for Mechatronics, Milwaukee, MN
  23. Tavakoli, Hammond, Mariappan, and Kowalski, 1997, Integrating Engineering Design, Analysis and Manufacturing at Sophomore Level , Proceedings of ASEE Annual Conference.
  24. Mariappan, Cameron, and Berry, 1996, Multidisciplinary Undergraduate Mechatronic Experiments , Frontiers in Education Conference, Salt Lake City, UT
  25. Mariappan, and Berry , 1996, Mechatronics at GMI, Proceedings of Mechatronics, pp. 78-83, San Francisco, CA
  26. Mariappan, J., 1996, A Constraint Classification Scheme for Teaching Kinematics , ASEE Annual Conference, Washington, D.C.
  27. Lundstrom, Mariappan, and Berry , 1996, Improving Teaching Quality Through Total Quality Management , ASEE Annual Conference, Washington, D.C.
  28. Tavakoli, Hammond, Kowalski and Mariappan, 1996, Concurrent Teaching of Engineering Design, Analysis and Manufacturing at Sophomore Level , ASME Curriculum Innovation Awards, pp. 12-15.
  29. Ramachandran, Mariappan, Harvey, Johnson, Marchese, Sukumaran and Newell, 1999, Teaching Quality: An Integrated Total Quality Management Approach to Technical Communication and Engineering Design, ASEE Middle Atlantic Section Regional Conference , West Long Branch , New Jersey, pp. 30-34
  30. Ramachandran, Marchese, Mariappan and Schmalzel, 1999, The Sophomore Engineering Clinic: An Introduction to the Design Process Through a Series of Open Ended Projects , ASEE Annual Conference and Exhibition, Charlotte, NC, Session 2225, June 20-23
  31. Ramachandran, Farrell and Mariappan, 2000, A Multidisciplinary Control Systems Laboratory , ASEE Annual Conference and Exhibition, St. Louis, Missouri , Session 1526, June 18—21

Research Related

  1. Mariappan, 2006, Concept Evaluation Using Payoff Tables , submitted for ASME Design Technical Conf., Philadelphia , PA
  2. Mariappan, 2006, An Interactive Software Tool for Developing E-Learning Simulations , submitted for ASME Computers and Information in Engineering Conf., Philadelphia , PA
  3. Tavakoli, Mariappan and Huang, 2003, Design for Assembly Vs. Design for Disassembly – A Comparison of Guidelines , ASME International Mechanical Engineering Congress, Washington, D.C., November .
  4. Mariappan, 1996, Design for Recyclability , 7th Annual GMI Industry Symposium, Flint, MI .
  5. Mariappan and Krishnamurty, 1996, A Generalized Exact Gradient Method for Mechanism Synthesis , Journal of Mechanisms and Machine Theory, V. 3, # 4, pp.413-421.
  6. Krishnamurty, Soni, and Mariappan, 1996, Branching Determination in Spatial Mechanisms , Advances in Mech. Engineering , Narosa Publishing, pp. 153-167, New Delhi.
  7. Mariappan and Krishnamurty, 1994, Determination of Branch Free and Circuit Free Solutions During the Synthesis of Mulitloop Mechanisms , DE-Vol. 70, Proc. of the ASME Design Technical Conferences, pp. 329-336, Minneapolis , MN.
  8. Mariappan and Krishnamurty, 1993, Development of an Exact Gradient Approach for Optimal Synthesis of Mechanisms , DE-Vol. 65-1, Proc. of the ASME Advances in Design Automation Conference, Vol. 1, pp. 427-432, Albu querque, NM.
  9. Mariappan and Krishnamurty, 1993, Application of the Exact Gradient Approach in Optimal Synthesis of Mechanisms , DE-Vol. 65-1, Proc. of the ASME Advances in Design Automation, Vol. 1, pp. 433-440, Albuquerque, NM .
  10. Mariappan and Krishnamurty, 1992, Using Exact Gradients in Mechanism Design , DE-Vol. 44-2, Proceedings of the ASME Advances in Design Automation Conference, Vol. 2, pp. 53-59, Scottsdale , AZ .
  11. Mariappan, and Berry , 1995, Virtual Prototype Simulation , Proc. of 6th Annual, GMI-Industry Symposium, Flint , MI .
  12. Mariappan and Arulraj, 1988, Integrated Approach to Design and Manufacture of Gas Turbine Components Using Group Theory , Defense Science Journal, Vol. 38, pp. 457-466.
  13. Mariappan and Shetty, 1987, File Secrecy in a Multi-User Environment, Defense Science Journal, Vol. 37, pp.489-494 .
  14. Subhas, Venkateswaran, and Jawaharlal 1988 , Development of Software Package for Integrated Computer-Aided Manufacturing of Jet-Engine Components Based on Group Technology , Proc. of II National Seminar on Computer Applications in Defense, Vol. 1.
  15. Sundar and Jawaharlal, 1988, Computer Aided Analysis and Animation of Planar Mechanisms , Proc. of II National Seminar on Computer Applications in Defense, Vol. 1.

White Papers

  1. Elmore, B., Mariappan, J., and Hays, G., 2003, Improving Performance through Simulation - A Scenario-Based Learning Approach, White Paper - Experia Solutions, MN
  2. Elmore, B., Mariappan, J., and Hays, G., 2003, Scenario-based Learning vs. Role Plays and Case Studies, Experia Solutions White Paper, MN

K-12 Related

  1. Jawaharlal Mariappan, Ph.D., Bob Elmore, Ph.D., Gary Hays, Babu Aharam and Rita Jawaharlal, 2003, A Scenario-Based Learning Approach to Teach K-12 Math in Tamil, Chennai, India, http://www.infitt.org/ti2003/papers/31_mariap.pdf
    Order of operations in Tamil: http://206.29.89.105/tamil/tamil2.htm
    Telling time in Tamil: http://206.29.89.105/tamil/tamil1.htm

Articles


Presentations

  1. Mariappan, Fan and Monemi, 2005, Service Learning Projects - Design for Extreme Affordability, Service Learning Conference, Cal Poly Pomona, CA

 

©2005 Jawa Mariappan