Name: Section: Section One Section Two Section Three
(1) The equation for calculating slab on grade heat loss: q = F2 P (delta T), the P represents,
a. Property of rigid insulation. b. Perimeter length of slab. c. Potential heat loss per square foot. d. Protection of soil on heat loss.
(2) What are the factors that cause infiltration in building?
a. poor envelop construction. b. wind and opening of doors and windows. c. stack effect. d. all of the above.
(3) If a room has 6000 cubic feet of volume, with 2 air change per hour of infiltration rate, it is equivalent to;
a. 100 CFM b.1200 CFM. c. 200 CFM. d. 6000 CFM.
(4) Which one of the following explanations on "Design Condition" is inaccurate?:
a. It is always 30 Deg. F for Pomona. b. It is used to calculate Max. Heat Gain. c. It is used to calculate Max. Heat Loss. d. It indicates the percentage of time in a year that the outdoor temp. will be above such design condition.
(5) What are the three methods used to comply with Title 24?
a. Hand Calc., Calculator, & Computer. b. Prescriptive, Point, & Computer. c. R-Value, U-Value, & Tot. Energy. d. Observation, Estimate, & Validation.
Questions? Type your questions (feedback) in box below.
Check out Dr. Wu's Homepage.
This page developed and maintained by Dr. Hofu Wu Click here to contact him via e-mail
California State Polytechnic University, Pomona